![background image](http://html.mh-extra.com/html/promise-technology/vtrak-s3000/vtrak-s3000_quick-start-manual_1617268060.webp)
VTrak S3000 Quick Start Guide
60
The
Select a WWPN Port Mapping Type
dialog box opens.
3.
In the dialog box, choose the appropriate mapping type for your system.
•
One to One
– You do not use multipathing.
•
All to All
– You use multipathing, such as
PerfectPath
on Windows.
Click the
Next
button to continue.
The
Select Initiator
dialog box opens.
4.
In the dialog box, click the Initiator WWPN you want to use.
You can only choose one. Click the
Next
button to continue.
The
Select Target
dialog box opens.
5.
In the dialog box, click the Target WWPN you want to use.
You can only choose one. Click the
Next
button to continue.
The
Select LUN numbers for the resources
dialog box opens.
6.
In the dialog box, choose a
Starting LUN
from the menu.
The default LUN number is 0 (zero).
Click the
Next
button to continue.
The
Assign SAN Resource(s) to the SAN Client
dialog box opens.
7.
In the dialog box, verify the information and click the
Finish
button.
A success message displays.
8.
In the message, click the
OK
button.
The new SAN resource appears in the Tree under the SAN client
to
which you assigned it.
Assigning Storage to an iSCSI Client
To assign storage to an iSCSI client:
1.
On the client system, in the Microsoft iSCSI Initiator, add the IP address of
the target subsystem.
2.
In the Management Console, in the Tree under SAN Clients
, right-click
an iSCSI client
, and choose
Create Target
from popup menu.
Click the
Next
button to continue.
The
Create iSCSI Target
dialog box opens.
Important
If you checked
Is Clustered
when you created the SAN client, be
careful that you do NOT assign the same LUN to different SAN
resources.