![background image](http://html.mh-extra.com/html/promise-technology/vsky-a1100/vsky-a1100_product-manual_1617259018.webp)
1G network management connection
Connect to the 1G LAN for device management.
Note that this is also the network used for server and storage configuration after completing the initial
configuration tasks.
To establish the management path:
1.
Attach one end of a Cat 6 or better Ethernet cable to the 1G Ethernet connector or NIC in the Host PC.
Attach the other end of the Ethernet cable to one of the ports on a Gigabit Ethernet switch.
2. Attach one end of an Ethernet cable to one of the ports on the same Gigabit Ethernet switch.
Attach the other end of the Ethernet cable to 1G LAN port
eth0
on the rear panel of the VSky A1100.
If you are setting up a cluster, repeat Step 2 for every VSky server that will operate in the cluster.
Note
The 1G management network path is used for management of both the Vess R2600fiS
and VSky A1100. Make sure to connect all VSky A1100 and Vess R2600fiS devices with this
management connection.
13
Hardware Setup
Promise Technology, Inc.