![background image](http://html.mh-extra.com/html/promise-technology/vsky-a1100/vsky-a1100_product-manual_1617259030.webp)
Now that the first node of the cluster is setup, repeat this entire configuration procedure for every node added
to the cluster. Make sure to enter
join
in
Step 6
.
Once the entire cluster is setup, you can use the Web GUI to complete the configuration.
8. Commit the settings and create the cluster.
9. If you have a perpetual license, you can activate it by entering
yes
. To use the first temporary license,
enter
no
.
10. Exit the CLI menu after completing configuration of each node by typing
exit
and pressing the
Enter
key.
Note
You can verify that the storage volume and spare drives are configured by
accessing the Vess R2000 using the CLI menu. For instructions on how to do
this, see “Create array and spare drive” on page 41.
Would you like to create mycluster01?
(yes/no or exit the wizard and press
Enter):yes
Setting RAID . . .
Pd = 13
Hot spare drive existed
Setting RAID done
Activating trial0 license . . .
Setting network . . .
Setting network done
Setting timezone automatically . . .
Your time zone is Asia/Taipei.
Setting timezone automatically done .
. .
Run perpetual license activation?(yes/
no, default :no)
creating storage volume . . .
100%
Run the wizard done.
25
Initial Setup
Promise Technology, Inc.