Promise Technology VSky A1100 Page 8 Product Manual Download

Page: 8 / 126

Front Panel

Feature

Description

Gigabit LAN LEDs

Lights when a valid link is established on the corresponding Gigabit LAN port

(from left to right, ports 4-1), blinks when there is activity on the port. Normally

only one LAN port (

eth0

) is used.

Message LED

Indicates a hardware event.

SSD Access LED

Lights when there is read/write activity on the SSDs.

Power button/LED

Press this to power on the system. This lights when the system is powered on.

Locate LED

Normally dark. Lights when the location feature is triggered.

Default setting button

Press to return system configuration to default settings.

SDD disk drive carriers

Two SSD drives are installed. Each drive carrier has a Status LED (uppermost)

and Activity LED (lowermost) on the right front side.

Front view of VSky A1100bSM

USB ports

2 x USB 3.0

VGA port

1G LAN LEDs

Message LED

SSD Access LED

Default setting button

Locate LED

Power button/LED

SSD disk carriers

Introduction

Promise Technology, Inc.

Summary of Contents for VSky A1100






























































































































Search results

Summary of Contents for VSky A1100

Reviews:

Related manuals for VSky A1100

Brands by name

Popular brands

Promise Technology VSky A1100, Product Manual

Search results

Summary of Contents for VSky A1100

Reviews:

Related manuals for VSky A1100

Brands by name

Popular brands