Promise Technology VSky A1100 Product Manual Download Page 28

Page: 28 / 126

Now

create

(or

join

) the cluster, and finish the settings for the cluster.

• Create or Join cluster

• Name the cluster

• Replication number (see below)

4. Enter the IP address or URL for the NTP server.

5. Enter a name for the storage volume.

Important

This step will create a RAID5 (15 physical drives with a hot spare drive) on each RAID box

and JBOD. Each multipath device is built on top of a RAID logical drive over two Fibre

Channel paths, and used as a storage volume. Therefore, two devices are displayed over

the Fibre Channel paths. That is, two devices are displayed for a single target (RAID logical

drive) in the “iSCSI/FC Disks” table of Hosts\<host IP>\Storage web page. This is normal.

Please enter “create” or “join” a

cluster(e.g., create): create

Please enter a cluster name

(e.g., mycluster01): mycluster01

Please enter a replication number

(between 1 to 3) of object data(e.g.,

2): 2

Please enter an ntp server ip address or leave blank and

press Enter: xxx.xxx.xxx.xxx

Please enter a storage volume name (e.g., storage01):

storage01

Initial Setup

Promise Technology, Inc.

Summary of Contents for VSky A1100






























































































































Search results

Summary of Contents for VSky A1100

Reviews:

Promise Technology VSky A1100, Product Manual, Page: 28 / 126

Search results

Summary of Contents for VSky A1100

Reviews: