TX 410 operators guide
Pro-Bel
88
Issue 2
17.1 Selecting multiple channels
1
Press
<ASSIGN>
to activate the selection controls.
The
<ASSIGN>
button lights. Channel buttons
<1>
to
<6>
are now
active.
2
Press required channel button
<1>
to
<6>
.
Pressing an unlit channel button,
<1>
to
<6>
causes the button to
light and connects the panel to the corresponding TX Series system
(chassis).
Pressing an illuminated channel button,
<1>
to
<6>
causes the
button to be extinguished and disconnects the panel to the
corresponding TX Series system (chassis).
3
Repeat step 2 until the channel buttons lit correspond to those to
be controlled.
4
Press
<ASSIGN>
to de-activate the selection controls.
Pressing the
<ASSIGN>
button
after chassis selection extinguishes
the button and prevents further selection or deselection of buttons
<1>
to
<6>
.
Note:
It is possible to have the panel connected to all sets of electronics
(i.e. All buttons
<1>
to
<6>
are lit).
The LCD touchscreen, source assign displays and all lamp tallies reflect
the settings for the leftmost selected system (i.e. the lowest number
channel button lit).
Summary of Contents for TX 410
