pro bel TX 410, Operator'S Manual

Page: 74 / 89

TX 410 operators guide Pro-Bel
74
Issue 2
DSK setup
1
From the plasma display home screen, press the <DSK> button
(see chapter 12).
The DSK screen is displayed.
2
Select the DSK to be setup by touching the top half of the screen for
DSK 1, or the bottom half for DSK 2.
The Clip and Gain percentage bars are bound by a rectangle
indicating the active keyer.
3
Check that EXT is highlighted in the label for the
<SELF/EXT>
button. If no external key for the DSK is available, press
<SELF/EXT> to highlight SELF.
4
While viewing the DSK preview monitor, adjust the Clip and Gain
values for the DSK until you obtain the desired effect. Alternately
press the
<DSK X Lin’r> button to default to linear key settings.
5
If the DSK is to be controlled manually, press the rate ‘soft’ button
to toggle between the
<SLOW>
,
<MED>
, or
<FAST>
fade rates.