pro bel TX 410, Operator'S Manual

Page: 53 / 89

Pro-Bel TX 410 operators guide
HU-TX 410OG
53
9.2 Controlling a routed machine
If the devices are connected via a router, first select an input bus then
select the source on that bus corresponding to the machine to be
controlled.
1
Select the input bus to control by pressing the <PST> or <AUX>
button on the machine control panel.
2
Select the required source by pressing the button in the row
corresponding to the bus selected in Step 1.
3
Use the six command buttons on the machine control panel, as
required, to control the device.
Note: Machines selected on the PST bus can be 'rolled' and 'taken' to air
using either the <PRE-ROLL/TAKE> button, where they have been cued
to the pre-roll time for the machine (shown in the display above the
<PRE-ROLL/TAKE> button); or the <ROLL> then <TAKE> buttons.