Printronix L5535, Maintenance Manual

Page: 352 / 358

II–352
output section, theory, II–124
output, theory, II–129
parking, theory, II–130
sensors
paper empty, II–246
paper near-end, II–143
paper output (EPS0), II–144
paper register, II–246
paper size, II–244
paper timing, II–247
transport section, theory, II–124
transport, theory, II–128
Paper back-feed sensor (PBFS), I–346
adjustment, I–219
Paper cassette, paper jams at back of, I–111
Paper exit gate solenoid (EGSL), I–301
Paper exit sensor 0 (EPS0),
sensors/switches, I–327
Paper exit sensor 1 (EPS1),
sensors/switches, I–330
Paper exit sensor 3 (EPS3),
transfer assembly, I–276
Paper exit sensor 4 (EPS4),
transfer assembly, I–276
Paper feed cassette, I–59, II–125, II–238, II–245
Paper guide interlock switch, II–250
Paper Jam at Drum (Error 11), I–140
Paper Jam at Entrance (A) (Error 16), I–144
Paper Jam at Entrance (A) (Errors 67, 69,
and 6B), I–164
Paper Jam at Entrance (A) (Errors 68
and 6A), I–165
Paper Jam at Exit - facedown (Error 13), I–141
Paper Jam at Exit (Error 04), in transport
section, I–132
Paper Jam at Exit (Error 05), in paper output
section, I–133
Paper Jam at Exit-face up (Error 13), I–141
Paper Jam at Fuser (Error 03), I–131
Paper Jam at Fuser (Error 12), I–140
Paper jams
at back of paper cassette, I–111
cut sheet, I–111
fanfold, I–107
in face up or face down paper path, I–115
in transport input section, I–112
in transport output section, I–114
near paper output section, I–108
near tractor, I–107
Paper near-end sensor (PNES), I–347
photoemitting board, I–347
photoreceptor board, I–348
Paper output section, paper jams near, I–108
Paper path, face up or face down,
paper jams in, I–115
Paper size, cassette, I–59,
II–125, II–245
Paper stacker, II–263
Paper transport, system monitoring, theory, II–142
Park fanfold paper command, theory, II–168
Part numbers, spares, II–19
Parts
breakdown, II–19
replacement, I–72
Perforation cutter, drive, theory, II–138
Photoconduction section, theory, II–114
Photoreceptor drum
cleaning, I–96
disposal, I–259
installation, I–41
peripheral equipment, I–260
replacing, I–253
Pickup motor encoder, II–248
Pickup roller unit, I–310
Power paper stacker, I–55,
II–263
assisting arm position sensor (APS1), II–285
assisting arms, II–278
basic operation, II–289
belt removal procedures, II–291
cover, II–292
detection errors, II–288
drive principles, II–275
elevator belt, II–310
elevator down sensor (EDS), II–283
elevator motor encoder (EME), II–284
elevator switches (ESWA/ESWS/ESWD/
ESWH), II–287
elevator table, II–279
elevator upper/lower limit switches (LIMT1/
LIMT2), II–286
inside left frame, II–293
inside right frame, II–299
jam sensor (PPS), II–281
operation, II–271
paper moving sensor (PMS), II–280
paper surface sensor 1 and 2 (PSS1/PSS2),
II–282
physical description, II–263
removal, II–270
safety sensors 1 and 2 (SS1/SS2), II–287
setup and connections, II–266