Printronix L5535, Maintenance Manual

Page: 288 / 358

II–288
Appendix C
Detection Errors
Detection Errors
The errors detected by these sensors and switches are as follows:
Operator Call Status Errors
Service Call Status Errors
Error Code Meaning
Stacker Error 53 Check the connector between the stacker
and the printer.
Interlock action 54 Safety sensor 1 or 2 turned off, and
interlock operated.
Folding defective 55 Defective folding of paper occurred (PPS
on or off time counted up).
Stacker full 56 The volume of folded paper has reached
capacity (SFS detected elevator table).
Stacker not ready 57 Power stacker not ready.
Not auto mode 58 Power stacker not in auto mode.
Stacker lowest position 5C Elevator table in down position (EDS
detected elevator table).
Error Code Meaning
Stacker capacity over 59 Elevator table is at highest or lowest
position (LIMT1 or LIMT2 detected
elevator table).
Motor abnormality detection 1 5A Action abnormality of stacker motor has
been detected.
Motor abnormality detection 2 5A Action abnormality of elevator motor has
been detected.
Motor abnormality detection 3 5A Action abnormality of swinger motor has
been detected.
Motor abnormality detection 4 5A Action abnormality of assisting arm drive
motor has been detected.