Printronix L5535, Maintenance Manual

Page: 348 / 358

II–348
18 - Drum Motor Fail (complete stop), I–146
19 - Surface Voltage Too High, I–147
1A - Surface Voltage Too Low, I–149
1B - Tractor Detent Fail, I–150
1E - Fuser Supply Fail, I–151
1F - Fuser Failure, I–151
20 - Fuser Lamp Overheat, I–152
26 - No Cleaning Unit, I–153
28 - Waste Toner Full, I–153
29 - No Waste Toner Box, I–154
2A - Toner Low, I–154
2B - Toner Density Too High, I–155
2C - Toner Density Too Low, I–155
2D - Toner Empty, I–154
32 - LED Head Overheat, I–155
38 through 47 - MC Board CPU Internal Error,
I–156
48 through 4D - Controller Comm. Fail, I–156
50 through 53 and 5B - Stacker Fail, I–157
54 - Stacker Interlock Fail, I–158
55 - Stacker Fail, I–158
56 - Stacker Full, I–159
57 - Stacker Not Ready, I–159
58 - Stacker Not Auto Mode, I–159
59 - Stacker Fail, I–160
5A - Stacker Fail, I–161
5C - Stacker Fail, I–162
5D - Stacker Comm. Fail, I–157
60 through 62, 6E, and 70 - Cut-sheet Comm.
Fail, I–162
63 - Cut-sheet Feeder Fail, I–162
64 - Cut-sheet Paper Skew, I–163
65 - Cut-sheet Pick Miss, I–163
66 - No Paper Cassette, I–164
67, 69, and 6B - Paper Jam at Entrance (A),
I–164
68 and 6A - Paper Jam at Entrance (A), I–165
6C - Cut-sheet Cover Open, I–165
6D - Cut-sheet Motor Fail, I–166
6F - Cut-sheet Paper Empty, I–167
78 Main Charger High Voltage Error, I–167
79 Transfer Charger High Voltage Error, I–168
7A Precharger High Voltage Error, I–168
7B Cleaning Bias High Voltage Error, I–169
7C Developing Bias High Voltage Error, I–170
7D Separator Charger High Voltage Error,
I–170
Error messages table, I–116
ERROR OCCURRED / FLUSHING
QUEUES *, I–117
Errors
cut sheet feeder unit, II–251
power paper stacker, II–288
F
Face down paper out drive belt, I–309
Face gate solenoid (FGSL), I–301
Face up or face down paper path,
paper jams in, I–115
Fan
controller cooling, I–358
fuser reflector cooling (FCF), I–300
head blower (HBF) and LED air filter, I–299
head blower, MC board, I–212
head cooling (HCF), I–297
head cooling, MC board, I–212
vacuum (VAF), transfer assembly, I–276
Fan-fold Paper Empty (Error 02)
upon power-on, I–130
when loading/beginning print, I–131
Fanfold paper jams, I–107
Fanfold Paper, engine checker, II–340
Fanfold paper, loading, I–55
Fanfold X/Y adjustment, I–106
Fault messages table, I–116
Features, printer, I–28
Feed fanfold paper (1/2 inch) command,
theory, II–169
Feed motor
encoder, II–249
encoders (FME 19/20), I–289
engine checker, II–339
FMT, I–289
MC board, I–207
Feeder, cut sheet, II–235
FILE EXISTS / ENABLE OVERWRITE, I–120
FILE SYS FULL / ADD FLASH, I–120
FILE SYS FULL / DELETE FILES, I–120
FILE SYS FULL / OPTIMIZE&REBOOT, I–120
FILE SYS INVALID / OPTIMIZE&REBOOT, I–120
FILE SYS WRITE / CHECK FLASH, I–121
Filter
flash power supply cleaning, I–99
lamp cleaning, I–86
Fixing section, theory, II–122
Flash memory, loading, I–228,
I–231
Flash messages
CLEARING PROGRAM / FROM FLASH, I–117
DIAGNOSTICS / PASSED, I–117
ERROR