Printronix L5535, Maintenance Manual

Page: 354 / 358

II–354
Schedule
consumables replacement, user responsibility,
I–70
replacement, service provider responsibility,
I–71
Schedules, maintenance, I–69
Scuff Lever Open (Error 07), knob "C", I–134
SECURITY CODE / VIOLATION, I–122
SELFOC lens, cleaning, I–97
Sensors
elevator internal paper intermediate sensor,
theory, II–144
elevator internal start sensor, theory, II–144
paper back-feed sensor, theory, II–144
Paper near-end, theory, II–143
paper output sensor 0 (EPS0), theory, II–144
paper output sensor 1 (EPS1), theory, II–144
paper output sensor 2 (EPS2), theory, II–144
paper registration sensor, theory, II–144
paper timing sensor, theory, II–144
Sensors/switches, I–323
cut sheet feed motor encoder (FME), II–249
cut sheet feed sensor (PFS), II–246
cut sheet pickup motor encoder (PME), II–248
drum cleaner set sensor, I–326
drum surface potential sensor (DSPS), I–323
nip switch (NPSW), I–327,
I–329
paper exit sensor 0 (EPS0), I–327
paper exit sensor 1 (EPS1), I–330
paper guide interlock switch (ICIL), II–250
paper jams
See Jam detection sensors, I–101
paper register sensor (PRS), II–246
paper timing sensor (PTS), II–247
stacker assisting arm position sensor (APS1),
II–285
stacker elevator down sensor (EDS), II–283
stacker elevator motor encoder (EME), II–284
stacker elevator switches (ESWA/ESWS/
ESWD/ESWH), II–287
stacker elevator upper/lower limit switches
(LIMT1/LIMT2), II–286
stacker full sensor (SFS), II–283
stacker jam sensor (PPS), II–281
stacker motor encoder (SME), II–284
stacker paper moving sensor (PMS), II–280
stacker paper surface sensor 1 and 2 (PSS1/
PSS2), II–282
stacker safety sensors 1 and 2 (SS1/SS2),
II–287
stacker swinger position sensor (SPS), II–285
stacker transfer unit paper sensor (PMS),
II–280
theory, II–141
upper/lower paper empty sensor (PES1/PES2),
II–246
upper/lower paper size sensor, II–244
Separator Charger High Voltage Error
(Error 7D), I–170
Separator claw
assembly, I–262
drive, theory, II–139
Sequence of operation, II–159
Service levels
messages, clearing, I–69
page counts, I–68
Tech Service option, I–68
User Maint option, I–68
Setting up the printer, I–31
Setup precautions, I–22
Sheet feeder, II–235
Signal cable connections, I–40
Signals, input/output, II–194
controller board, II–194
DC power supply board, II–216
LVX040 controller board, II–194
MC board, II–203
PS-PCBA, II–216
Site selection, I–32
Sleeve motor, I–287
MC board, I–212
Software
loading into flash memory, I–228, I–231
page counter, I–69
Solenoid
cutter solenoid (CSL), I–302
face gate solenoid (FGSL), I–301
paper exit gate solenoid (EGSL), I–301
Spare parts list, II–19
Stacker
arm position sensor, II–285
elevator down sensor, II–283
elevator limit switches, II–286
elevator motor encoder, II–284
elevator switches, II–287
full sensor, II–283
jam sensor, II–281
motor encoder, II–284
paper moving sensor, II–280
paper surface sensor, II–282