Deep Clean DCFT Conveyor Belt
Monthly
PR34 M01
Printed in USA 12/20 © 2020
61
527-504revM_EN
Prince Castle DCFT
-MCD V
ertical T
oaster
Monthly PR34
M01
If Using Kay QSR Heat Activated Grill & Toaster Cleaner (HAGTC)
, follow the below procedure
Turn the toaster On.
Once the unit is at operating
temperature, put on heat resistant
gloves.
Hot Surfaces
NOTE: Failure to wear
heat-resistant gloves while
performing this cleaning
procedure can result in burns.
Remove the main release sheet
from the toaster.
Place release sheet on a
clean, flat and dry surface.
Inspect the release sheet for
tears, cracks and sticking.
Replace when necessary.
Equipment Alert
NOTE: DO NOT fold or crease
release sheet or take to the
3-compartment sink to be
cleaned.
Apply Solution.
Put on Heat Resistant Gloves.
Open the conveyor drawer.
Ensure toaster is hot before
applying Heat Activated Grill &
Toaster Cleaner (HAGTC). Apply
a small amount HAGTC to a
clean, sanitizer-soaked grill cloth
and then spread evenly across
exposed section of belt to
completely coat the belts.
Repeat applying product until all
areas of the belt are coated.
Close conveyor door and let run
for 5 seconds to advance the belt
to new location before applying
additional cleaner.
Spread solution onto belt.
Spread solution onto belt, going
across/with the grain of the belt.
Close the conveyor door and
allow conveyor to run for 6
minutes. (Stains will begin to
darken). Any smoke is completely
normal.
