527-504rev
M
_EN
31
Printed in USA 12/20 © 2020
Vertical Toaster
DCFT-MCD Series
Remove/Replace Club Gear Transfer Belt (cont.)
Tuck excess wire slack so it does not get pinched
when installing club.
19
Put belt on club transfer gear.
20
Align club shafts with bearing holes.
21
Wrap belt over shaft drive gear.
22
Push down club assembly into unit evenly.
23
Use 11/32" nut driver to attach (4) main club assembly
nuts.
24
Hook cover sheet over terminal block.
25
Use 11/32" nut driver to install back terminal cover top
nut.
26
Use flathead screw driver to install bottom back cover
screw.
27
Use 5/32" T handle to install (2) club platen bolts.
28
Use 11/32" nut driver to install front cover top nut.
29
Use flathead screw driver to install front cover bottom
screw.
30
Lift club tensioner arms.
31
Install both club belts.
32
Close tensioner arms and club latch.
33
Install left side panel.
34
Plug in unit.
35