Printed in USA 12/20 © 2020
40
527-504rev
M
_EN
Vertical Toaster
DCFT-MCD Series
Unplug unit.
1
Failure to disconnect power
from the unit before servicing
could result in severe bodily
injury or death. The ON/OFF
Switch does not disconnect
incoming power to the unit.
WARNING
Refer to Club Removal. Page: 25.
2
Remove/Replace Front Club Probe
Use 5/16" nut driver to remove screw from platen.
Remove bracket.
3
Remove front club platen probe.
4
Cut zip-ties and remove sleeving from probe.
5
Feed new probe through sleeving. Secure with
zip-ties.
6
Apply AOS Silicon to probe.
7
Place probe in platen. Secure with bracket and 5/16"
screw.
8
Feed unsecured end of probe through lower slot in
platen.
9
After feeding end of probe through platen, reconnect
any necessary wiring.
10
Refer to club installation. Page: 27.
11
Feed new probe through sleeving. Secure with
zip-ties.
12
