Clean DCFT—In-Feed Assemblies
Bi-Weekly
PR34 W01
Printed in USA 12/20 © 2020
57
527-504revM_EN
Prince Castle DCFT
-MCD V
ertical T
oaster
Bi-We
ek
ly PR34
W01
Why
To maintain effectiveness of the Prince Castle MCD DCFT conveyor belt
Time required
5 minutes to prepare
15 minutes to complete
Time of day
After close
For 24-hour restaurants: during low-volume times
Hazard icons
Chemicals
Electricity
Hot Surfaces
Equipment Alert
Tools and supplies
OR
Bucket, clean and
sanitized towels
Bucket, soiled
towels
Heat Resistant
Gloves
McDonald’s DR
Concentrated
Disinfectant Cleaner
Solidsense
APSC
Three Compartment Sink
Procedure
1
Turn the toaster OFF and
Unplug Toaster.
After waiting 15 minutes for unit to
cool, put on the heat resistant
gloves.
Hot Surfaces
NOTE: Failure to wear
heat-resistant gloves while
performing this cleaning
procedure can result in burns.
2
Remove and clean release
sheet following Daily PM
procedure.
3
Remove the in-feed cover by
unscrewing top screws by
hand and take the in-feed cover
to the 3-compartment sink.
4
Wash, rinse and sanitize the
cover at the 3-compartment
sink.
Wash and sanitize with
Solidsense APSC or McDonald’s
DR Concentrated Disinfectant
Cleaner followed by sanitizer
solution. Allow to air dry.
Chemicals
Sanitizer solution, Solidsense
APSC or McDonald’s DR
Concentrated Disinfectant
Cleaner
5
Reinstall the in-feed cover.
6
Re-install release sheet
following Daily PM
procedure.
7
Turn the Toaster ON
The toaster is now ready to
resume use once it reaches
operating temperature.