Printed in USA 12/20 © 2020
16
527-504rev
M
_EN
Vertical Toaster
DCFT-MCD Series
Feed camshaft through square opening in frame.
17
Remove/Replace Heel Compression Adjust Assy (cont.)
Use leverage in order to secure left and right sides of
conveyor into frame.
18
On both left and right side of conveyor belt, secure
vice grip to bracket and top nut to hold assembly in
position.
19
Bracket
Nut
Install Sprocket shaft and feed through intermediate
support bearing.
20
Attach (2) E-clip to sprocket shaft (Both front and back
side of bearing)
21
Install club transfer gear with 5/64" set screw.
22
Use C-Clip tool to install C-Clip over gear.
23