Printed in USA 12/20 © 2020
24
527-504rev
M
_EN
Vertical Toaster
DCFT-MCD Series
Remove/Replace Motor and Drive Train Assembly (cont.)
Ensure the vice grips are still in place on both sides of
the unit.
10
Align drive train to holes in the sheet metal.
11
Align shaft pins with slotted gear on both sides.
12
Install (2) 3/8" drive train mounting nuts.
13
Remove vice grips on both sides. Close front and back
doors.
14
Install (2) 3/8" chain guard nuts.
15
Re-Connect motor power plug.
16
Re-connect display and overlay wires to right side
panel.
17
Align panel to DCFT. Install (7) screws.
18
Install both compression knobs.
19
Plug in unit.
20
