66
Revision 00 EN - 01/2021
HP-MSM-HB
35,0(6
To conduct a manual caustic measurement, follow these steps:
1. Delete the old data in the
Edit > Clear all planes
dialog window or create a new document
File > New
.
2. In the
Caustic settings
dialog window, click on
Manually adjusted (menu Measurement > Caustic)
.
3. Select the first plane in the
Measurement settings
dialog window (men Measurement > Single)
.
4. Configure the z-position in the
Measurement settings
dialog window.
5. Configure the measurement window size and position in the
Measurement settings
dialog window.
6. Perform a measurement in the configured pane.
7. Select the next plane and start again at Point 3.
Steps 3 through 6 can be repeated ten to fifteen times.
Record a time series (menu
Measurement > Single
)
Fig. 13.13: Dialogue window
Measurement settings
Recording a time series corresponds to manual caustic measurement, but with the z-position staying the
same on all planes.
1. Delete the old data in the
Edit > Clear all planes
dialog window or create a new document
File > New
.
2. Select the first plane in the
Measurement settings
dialog window (men Measurement > Single)
.
3. Configure the z-position in the
Measurement settings
dialog window.
4. Configure the measurement window size and position in the
Measurement settings
dialog window.
5. Perform a measurement in the configured pane.
6. Select the next plane and use the old settings by clicking the
Copy
button.
