110
Revision 00 EN - 01/2021
HP-MSM-HB
35,0(6
Wave length
The wave-length is the basis for a correct determination of the beam quality factor M². It is 1.064 μm for
Nd:YAG laser.
A wavelength can also be typed in numerically.
While only the calibration points of the measuring objective can be configured in the
CCD Setting
dialog win-
dow, the exact value of the laser’s wavelength can be entered in this window. This value is used in all numeric
evaluations, such as the calculation of the beam quality factor M².
Caution: If the wavelength is newly selected in the
CCD Setting
dialog window, the value in this
window will be overwritten with the selected calibration point.
Application
By means of the button
Apply
the entries can also be changed after a measurement. With the button
Apply all planes
the entered values are inserted and settled, while the button
Apply
only refers to the value
in the current plane.
Laser power
Entering the laser power is a reference value for the relative power position in the menu point
Single mea-
surement
or
Caustic measurement
. Furthermore, a z-axes offset as well as a coordinate rotation angle can
be entered.
Comment
Please do not use the character # in the comment field “Comment”. This character is used as a separator
in the software. If it is entered in the field “Comment”, problems could occur when it comes to storing or
activating measuring data.
A line break can be enforced by means of the key combination:
<Ctrl> + <Enter>
.
