manualshive.com logo in svg

Primes HP-MSM-HB, Original Instructions Manual

Share
Download
Primes HP-MSM-HB Original Instructions Manual Download Page 12

12

Revision 00 EN - 01/2021

HP-MSM-HB

35,0(6

Further symbols in this manual:

Here you can find useful information and helpful tips.

With the CE designation, the manufacturer guarantees that its product meets the requirements of 
the relevant EC guidelines.

X 

Call for action

3 

About this operating manual

This manual describes how to work with the HP-MSM-HB and operate it with the LaserDiagnosticsSoftware 
LDS 2.98 (referred to as “LDS” in the following).
The measuring device is operated via PC or via the system control.
The description of the software focuses on configuration and communication settings as well as measure-
ment operation.

This operating manual describes the software version valid at the time of printing.
Since the user software is continuously being developed further, the supplied data medium may 
have a different version number. Correct functioning of the device is, however, still guaranteed with 
the software.

If you have any questions, please let us know the software version you are using. The software version can 
be found under the following menu item: 

Help > About LaserDiagnosticsSoftware

.

Fig. 3.1: 

Information regarding the current LDS software version

Summary of Contents for HP-MSM-HB






















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands