120
Revision 00 EN - 01/2021
HP-MSM-HB
35,0(6
Automatic caustic measurement (menu
Measurement > Caustic > Automatic)
Fig. 24.10: Dialogue window
Caustic settings
During automatic caustic measurement, the minimum and maximum z-position is selected together with the
number of measuring planes. The measurement cycle begins with an automatic beam search in the specified
starting plane. The beam search only occurs within the area of the starting plane’s measurement window.
Settings can be entered manually. After manually entering the settings for the measurement planes as de-
scribed in the following section, the caustic measurement can be repeated automatically by choosing the
Manually adjusted
mode.
It is also possible to store measurement settings such as window size, position, etc. in a data file to be re-
loaded again if necessary (
File > Safe/Load measurement preferences
).
A measurement cycle is started by pressing the
Measure
button. All planes will be measured then one after
the other during the measurement cycle.
Manual caustic measurement as time series (menu
Measurement > Caustic > Manually adjusted)
The manual caustic measurement consists of a series of individual measurements at various z-positions, with
the results being stored in their own planes.
24.3.10 Start adjust mode (menu
Measurement > Start Adjust mode
)
Not relevant for HP-MSM-HB.
