65
Revision 00 EN - 01/2021
HP-MSM-HB
35,0(6
During automatic caustic measurement, the minimum and maximum z-position is selected together with the
number of measuring planes. The measurement cycle begins with an automatic beam search in the specified
starting plane. The beam search only occurs within the area of the starting plane’s measurement window.
If you don’t want the search window size to take up the maximum space (depending on the lens), the
window size can be adjusted, once the control box
Maximize Window
has been deactivated, by selecting
Adjust
in the menu. The
Details
menu point allows the user to configure the beam search parameters by
changing the spacial resolution, threshold value, and minimum signal.
If automatic find beam needs to be left out to save time, it can be deactivated in the
Options
dialog
window (
Menu
Measurement > Option
)
(activate check box
Beamfind
).
Manual caustic measurement (menu
Measurement > Caustic) and
(menu
Measurement > Single
)
Fig. 13.12: Dialogue window
Caustic settings
and
Measurement settings
The manual caustic measurement consists of a series of individual measurements at various z-positions, with
the results being stored in their own planes.
The start plane and number of measuring planes must match the settings in the settings window-
Measurement > Single > Measurement settings
.
