25
Revision 00 EN - 01/2021
HP-MSM-HB
35,0(6
7.4
Mounting the Fibre Bridge (option)
For mounting fiber lasers a fibre bridge with fiber holders can be mounted.
NOTICE
Damaging/destroying the device
In the upper z-axis position the cyclone can collide with the fiber optic holder and damage it
X
Dismount the cyclone before the startup!
4 Screws a.f. 2.5 mm
Alignment
tool on cyc-
lone
Mounting order
Distance plates are required to fix the fiber bridge. On newer models the plates are fixed under the feet of
the fiber bridge, on older models they are enclosed separately. In the following, the installation with separate
distance plates is described.
Distance Plate
Distance Plate
A
1. Put the distance plates on both sides of the
housing (picture A) and fasten them by means
of the dowel pins.
