manualshive.com logo in svg

Primes BM+ 100, Operating Manual

Share
Download
Primes BM+ 100 Operating Manual Download Page 72

PRIMES

BeamMonitor BM+ with LDS 2.98

72

Revision 01/2018 EN

16 

Maintenance and service

The operator is responsible for determining the maintenance intervals for the measuring device.
PRIMES recommends a maintenance interval of 12 months for inspection and validation or calibration.
If the device is used only sporadically, the maintenance interval can also be extended up to 24 months.

17 

Transport

To prevent damages, we recommend transporting the BeamMonitor BM+ either in its original packaging or 
in a PRIMES transport box. 

18 

Measures for the product disposal

Due to the Electrical and Electronic Equipment Act (Elektro-G) PRIMES is obliged to dispose PRIMES 
measuring devices manufactured after August 2005 free of charge. 
PRIMES is registered in the German “Used Appliance Register “ (Elektro-Altgeraete-Register EAR) as a 
manufacturer with the number WEEE-Reg.-Nr. DE65549202. 

Within the EU you are welcome to send your PRIMES devices to the following address, in case you want 
them to be disposed: 

PRIMES GmbH 
Max-Planck-Str. 2 
D-64319 Pfungstadt 
Germany

Summary of Contents for BM+ 100





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands