PRIMES
BeamMonitor BM+ with LDS 2.98
35
Revision 01/2018 EN
11.1.4
Single measurement (menu
Measurement>>Single measurement
)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
21
22
20
23
1
Single
Monitor
LineScan (option)
Starts a measurement in the chosen plane
Starts repeated measurements in the chosen plane automatically
Starts a measurement of a single trace with fixed y-axis
2
Start
Starts a measurement in the currently chosen plane
3
Stop
Finishes the measurement in the currently chosen plane
4
Reset
The measuring device is reset
5
Stop Motor
Stops the rotating measuring tip after the measurement is finished
6
Plane
Selection of the measuring plane (0-49) either explicit or by means of the buttons (+/-)
7
Entry field
Numerical entry of the z-position
8
Copy
Copies all settings (window size and – position; x, y, z; etc.) from the former plane to the current plane
(e.g. 1>>2)
9
Find beam
Starts an automatic beam search in the current measuring plane
10 Scan
Not relevant for BeamMonitor BM+
11 Ampl.
Slide control in order to adjust the electrical amplification
12 Power
Slide control in order to adjust the laser power to save it in the software
13 Entry field Power
Numerical input of the laser power to save it in the software
14 Entry field Ampl.
Numerical input of the electrical amplification
15 Averaging
Analysis of the serial measurements. Averaging algorithms: average value, values of the maximum
pixels and the value of the maximum trace
16 Averaging
Selectable number (1 – 50) of single measurements for the averaging
17 LED symbol and
bar graph display
Display for the degree of the signal saturation
(LED green
≙
ok, red
≙
not ok)
18
False color
Activates the option of the false color presentation
19 Zoom
Magnification settings for the measuring window
20 Symmetric
This option enforces the usage of square measurement windows, whose size is only adjustable via x.
21 X/Y
Setting of the size of the measuring window
22 Display
Measuring window shows the current measuring result.
23 Z
Slide control in order to set the z-position
