PRIMES
BeamMonitor BM+ with LDS 2.98
31
Revision 01/2018 EN
11
Software functions in detail
The LaserDiagnosticsSoftware is the control centre for all PRIMES measuring devices which measures the
beam distribution as well as focus geometries by means of which the beam propagation characteristics can
be determined. The LDS includes all functions necessary for the control of measurements and displays the
measuring results graphically.
Moreover, the systems uses the measured data to carry out an evaluation in order to give the operator of
the beam diagnosis an information regarding the reliability of the measuring results.
11.1
Settings
Due to the fact that the LDS is designed multifunctionally for all PRIMES devices, a few device-specific set-
tings have to be made before a measurement. Moreover, the system and beam geometry provided by the
customer are to be considered.
11.1.1
Sensor parameter
Mechanical limits
This function is not relevant for the BeamMonitor BM+.
Fig. 11.1: Dialogue window
Sensor parameters
Device
By means of this option, you can select the device which is supposed to be operated. Depending on the
number of devices connected, additional device numbers are assigned.
RPM (rotations per minute)
The rotational speed of the BeamMonitor BM+ can not be changed.
