PRIMES
BeamMonitor BM+ with LDS 2.98
25
Revision 01/2018 EN
10.3.2
The tool bar
By clicking the symbols in the tool bar, the following program menus can be reached immediately.
File administration
Presentation
File selection
Plane selection
1
2
3
4
5
6
7
8
9
10
11
1
- Create a new data record
2
- Open an existing data record
3
- Save the current data record
4
- Open the isometric view of the selected data record
5
- Open the variable contours line view
6
- Open review (86%)
7
- Open false color presentation
8
- Caustic presentation 2D
9
- List with all data records opened
10
- Display of the selected measuring plane
11
- Display of the measuring devices available for the bus by means of graphical symbols
All measuring results are always written into the document selected in the tool bar (item 9).
It is only possible to display documents chosen here. After opening, the data set has to be explicitly selected
(please see also chapter „11.2 Presentation and documentation of the measuring results“ on page 42).
i
Only the device selected in the tool bar is ready for the measurement.
Example:
A BeamMonitor BM+ as well as a PowerMonitor are connected with each other via a PRIMES bus. Both
devices are turned on and the LaserDiagnosticsSoftware is started. Then, the symbol of the device detected
first is activated, e.g. of the BeamMonitor BM+. For a power measurement with the PowerMonitor it is suf-
ficient, to click on the device symbol (PM) in the tool bar. Then you can activate the power measurement via
Measurement>>Power measurement
.
Fig. 10.5: Activating the PowerMonitor for a power measurement
