PRIMES
BeamMonitor BM+ with LDS 2.98
42
Revision 01/2018 EN
11.2
Presentation and documentation of the measuring results
This chapter describes the presentation, analysis and storage of measuring results.
In order to carry out comparisons between different measurements, the program can manage several
measuring data sets simultaneously. The opened data sets are shown in the tool bar. In order to open one
presentation, the data which is to be examined is selected in the list of the data selection and afterwards
the desired kind of presentation is chosen.
By clicking on the symbols of the tool bar the following program menus can be reached.
11.2.1
Tool bar of the LDS
Data administration
Notation
Data selection
Plane selection
1
2
3
4
5
6
7
8
9
10
11
1. Create a new data set
2. Open existing data set
3. Save data set
4. Open isometry presentation of selected data set
5. Open variable contour lines display
6. Open review (86 %)
7. Open false color presentation
8. Caustic presentation
9. List containing all data sets opened
10. Display of the chosen measuring plane
11. Display of the devices available at the bus by means of graphical symbols
In the menus for the notation of single measurements (
Variable contour lines, Isometry
and
False color presentation
) the option
Autoscale
effects the usage of the entire display range for the
measuring values.
Moreover, you have the possibility of switching between different image memories of series of measurements
by means of the
plane selection
. Switching is also possible by means of the cursor keys up/down if the
plane selection is selected. If the plane selection in the display menus is set on
Global
, switching simultane-
ously between the planes is possible via the selection in the tool bar.
The title of the dialogue window indicates the name of the data sets shown.
For the parallel evaluation of several measurements the program has 50 image memories which can record
one measurement each. These image memories (measuring plane) can also be used in order to record
changed measurement values in case of a parameter variation.
Due to the variation of the z-position in the different planes a caustic measurement is realized. Due to a
change of the laser power it is possible to simulate, e.g. the thermal inflow-behavior of the system. Similarly,
time series are possible. Respective displays are, for instance, possible by means of the menu item
Graphi-
cal review
.
