BeamMonitor BM+
35,0(6
37
Revision 02 EN - 02/2022
9.4.3
Search laser beam automatically with the find beam function
1. Follow the warning messages in
2. Switch on the laser.
3. Click on the
Settings
tab.
4. Click on the
Find beam
button.
The laser beam is automatically
searched for in the entire measuring
range. The measurement window and
gain are set automatically.
If the search is successful, the laser
beam is displayed in the graphic
representation.
If the beam is not displayed:
X
Check again the correct alignment of
the device on the x-y plane according
to chapter 7.2.3 on page 15.
X
Check the direction of the beam
entrance.
X
Adjust the gain.
X
Choose a different z-position.
X
Increase the laser power (step by
step).
5. If necessary, adjust the measurement
window manually according to 9.4.4
6. Start the measurement according to
