BeamMonitor BM+
35,0(6
24
Revision 02 EN - 02/2022
9.2
Connecting / disconnecting the device with the LaserDiagnosticsSoftware LDS
The PRIMES device obtains an IP address from the network via the Ethernet connection. The PC used must
be in the same IP address range as the PRIMES device. The DHCP option is deactivated by default (see
chapter 9.2.3 on page 26).
9.2.1
Switch on the device and connect it to the LDS
1. Switch on the device at the Power On / Off switch.
The optical display (see chapter 4.4 on page 11) shows the operating status.
2. Start the LDS by double-clicking on the program icon
in the start menu group or on the desktop icon.
The start screen appears.
3. Select the operating mode
Measure
.
Only if the
Show start screen
option is
disabled:
X
Click on the
Devices
tab and then on
the
+
Connect to device
button.
The
Connections
window appears.
4. Click on the desired device.
5. Click on the
Connect to device
but-
ton.
If the device does not appear:
1. Click on the
Search the network
button.
2. If the device still does not appear in
the
Connections
window, see chap-
