BeamMonitor BM+
35,0(6
27
Revision 02 EN - 02/2022
9.3
General information about working with the LDS
This chapter contains general information about the LDS. Read this general information before turning to the
following chapters on the various measurement modes.
9.3.1
Open „Device control“
menu
1. Click on the
Devices
tab.
2. Select the device and click on the
device function
Scanner
below the
device name.
The
Device control
menu with the
Measuring modes sections opens.
Device function
Measuring modes
9.3.2
Open a measuring mode
The desired measuring mode is selected in the
Device control
menu. The following measuring modes are
available:
•
Linescan
(see chapter 9.6 „Linescan“ on page 49)
•
Single planes
(see chapter 9.4 „Single planes“ on page 32)
•
Monitor
(see chapter 9.5 „Monitor“ on page 42)
X
After opening the
Device control
menu, click the button of the desired
measuring mode, for example
Single
planes
A drop-down list for changing the
measuring mode appears in the up-
per area of the
Device control
menu.
Change measuring mode:
1. Click on the arrow to open the drop-
down list.
2. Select measuring mode.
