BeamMonitor BM+
35,0(6
8
Revision 02 EN - 02/2022
Employing qualified personnel
The device may only be operated by qualified personnel. The qualified personnel must have been instructed
in the installation and operation of the device and must have a basic understanding of working with high-
power lasers, beam guiding systems and focusing units.
Conversions and modifications
The device may not be modified in terms of design or safety without the explicit consent of the manufacturer.
The same applies to unauthorized opening, dismantling and repair. The removal of covers is only permitted
within the scope of the intended use.
Liability disclaimer
Manufacturer and distributor exclude any liability for damages and injuries which are direct or indirect con-
sequences of using the device not as intended or modifying the device or the associated software without
authorization.
2
Symbols and conventions
Warning messages
The following symbols and signal words indicate possible residual risks in the form of warnings:
DANGER
Means that death or serious physical injuries
will
occur if necessary safety precautions are not
taken.
WARNING
Means that death or serious physical injuries
may
occur if necessary safety precautions are not
taken.
CAUTION
Means that minor physical injury
may
occur if necessary safety precautions are not taken.
NOTICE
Means that property damage
may
occur if necessary safety precautions are not taken.
Product safety labels
The following symbols are used on the device itself to indicate imperatives and possible dangers:
Read and observe the operating instructions and safety guidelines before startup!
Hand injuries warning
