BeamMonitor BM+
35,0(6
46
Revision 02 EN - 02/2022
9.5.4
Adjust the size and position of the measurement window manually
1. Click on the
Settings
tab.
2. Use one of the following options to
adjust the size of the measurement
window:
X
Enter the length and width in the cor-
responding fields.
X
Position the mouse pointer anywhere
within the measurement range and
drag while holding down the left
mouse button. Keep the mouse but-
ton pressed until the measurement
window meets your requirements.
3. Use one of the following options to
adjust the position of the measure-
ment window:
X
Enter the x-position / y-position in the
corresponding fields.
X
Position the mouse pointer within the
measurement window. Then drag
while holding down the right mouse
button.
4. Start the measurement according to
