BeamMonitor BM+
35,0(6
40
Revision 02 EN - 02/2022
Single measurements using z-incre-
ment spacing:
1. Click on the
Settings
tab.
2. Enter the spacing for the further
measurements in the
z-Increment in
mm
field.
3. Start the measurement according to
chapter 9.4.5 on page 39 and wait
until the measurement is completed.
The measured plane is one z-in-
crement away from the previously
measured plane.
4. Start a measurement again and wait
until the measurement is finished.
The measured plane is one z-in-
crement away from the previously
measured plane.
5. Repeat the last step as often as you
like.
Series measurement using z-increment
spacing:
The combination of the
Time series
and
z-Increment in mm
options enables
measuring a free caustic in one run.
1. Click on the
Settings
tab.
2. Enter the spacing for the planes to be
measured in the
z-Increment in mm
field.
3. In the
Number of measurements
and
Interval between measure-
ments in s
fields, enter the number of
measurements and the interval.
The interval is the time between the
end of one measurement and the
start of the next.
4. Start the series measurement accord-
ing to chapter 9.4.5 on page 39
and wait until the measurement is
finished.
