BeamMonitor BM+
35,0(6
53
Revision 02 EN - 02/2022
9.6.4
Adjust the width (length) and position of the measuring line manually
1. Click on the
Settings
tab.
2. Use one of the following options to
adjust the line width (length):
X
Enter the width (length) of the line.
X
Position the mouse pointer at any
point within the measurement area
and drag while holding down the
left mouse button. Keep the mouse
button pressed until the length of the
measuring line meets your require-
ments.
3. Use one of the following options to
adjust the position of the measuring
line:
X
Enter the x-position / y-position of the
line center in the corresponding fields.
X
Position the mouse pointer within the
measurement window. Then drag
while holding down the right mouse
button.
4. Start the measurement according to
