BeamMonitor BM+
35,0(6
28
Revision 02 EN - 02/2022
After selecting the measuring mode,
the corresponding toolbench is
opened.
If the toolbench has been closed, re-open
it by clicking the
Open measurement
toolbench
button.
9.3.3
Enter parameters and activate
Be aware that when configuring settings in one mode, some options are also applied in other modes as well.
For example, if you enter a parameter in the
Single planes
mode, it will be automatically applied to all other
modes that use this same parameter.
To transfer a parameter value entered in
the
Device control
menu to the active
configuration, it must be confirmed with
the Enter key.
1. Enter the desired value in the param-
eter field.
The background color of the param-
eter field changes to blue.
2. Confirm the entry by pressing the
Enter key.
The field returns to its original back-
ground color.
Example: blue parameter field
