BeamMonitor BM+
35,0(6
57
Revision 02 EN - 02/2022
11
Maintenance and service
11.1
Maintenance intervals
The operator is responsible for determining the maintenance intervals for the measuring device.
PRIMES recommends a maintenance interval of 12 months for inspection and validation.
If the device is used only sporadically, the maintenance interval can also be extended up to 24 months.
Please note that the safety and warning functions of the device must be checked regularly.
11.2
Cleaning the device surfaces
1. Close all device openings.
2. First clean the device surfaces with cleaned, oil-free compressed air.
3. For further cleaning, use a mixture of distilled water and isopropanol in a ratio of approx. 5:1.
Use lint-free cleaning cloths that do not cause scratches. This can be e.g. microfiber cloths or paper
towels from the cosmetics sector.
4. If these steps are not sufficient, please contact PRIMES or your PRIMES distributor.
12
Measures for the product disposal
PRIMES gives you the opportunity to return your PRIMES measuring device for free disposal within the
scope of the Waste of Electrical and Electronic Equipment (WEEE Directive). This service does not include
shipping costs. You can send PRIMES measuring devices to be disposed of within the EU to our address:
PRIMES GmbH
Max-Planck-Str. 2
64319 Pfungstadt
Germany
If you are located outside the EU, please contact your local PRIMES distributor to discuss the disposal pro-
cedure for your PRIMES measuring device.
PRIMES is a registered manufacturer in the German “Used Appliances Register“ stiftung elektro-altgeräte
register (stiftung ear). Our number is: WEEE-reg.-no. DE65549202.
