BeamMonitor BM+
35,0(6
38
Revision 02 EN - 02/2022
9.4.4
Adjust the size and position of the measurement window manually
1. Click on the
Settings
tab.
2. Make sure that the
autom. Measure-
ment window
option is not enabled.
Otherwise, the manual setting may be
overwritten when starting a measure-
ment.
3. Use one of the following options to
adjust the size of the measurement
window:
X
Enter the length and width in the cor-
responding fields.
X
Position the mouse pointer anywhere
within the measurement range and
drag while holding down the left
mouse button. Keep the mouse but-
ton pressed until the measurement
window meets your requirements.
4. Use one of the following options to
adjust the position of the measure-
ment window:
X
Enter the x-position / y-position in the
corresponding fields.
X
Position the mouse pointer within the
measurement window. Then drag
while holding down the right mouse
button.
5. Start the measurement according to
