Section V Parameter Function Table
96
Sect
io
n
V
42
Auto-run feature programs canceled Cancel program running function.
43
Automatic procedures to suspend
operation
Program running pause
44
Program running start mode
Program running start mode
45
Program running stop mode
Program running stop mode
46
Pulse count clearance
Edge trigger, frequency inverter pulse
counter O53 clearance
47
Pulse count input
Edge-triggered, set the pulse counter input
terminal
48
Before count loading
Edge-triggered pulse counter counts o5
maximum load o53
49
Upper count loading
Edge trigger,pluse counter O53 loading up
count value O55.
50
External default signal input (level)
External default signal input(level)
，
level
trigger , the system will alarm E_Set after
valid
51
1 pump soft-start
Electric leverl spring, control 1 pump
soft-start or stop.
Soft-start control must use 2 terminal
control , stop priority.
Need to set E01 load model 9, E12 1pump
is soft-start control pump.
52
1 pump stop
53
2 pump soft-start
Electric leverl spring, control 2 pump soft-
start or stop.
Soft-start control must use 2 terminal
control,stop priority.
Need to set E01 load model 9, E12 2pump
is soft-start control pump.
54
2 pump stop
55
3 pump start
Electric leverl spring, control 3 pump soft-
start or stop.
Soft-start control must use 2 terminal
control, stop priority.
Need to set E01 load model 9 , E12 3pump
is soft-start control pump.
56
3 pump stop
57
4 pump soft-start
Electric leverl spring, control 4 pump soft-
start or stop.
Soft-start control must use two terminal
control, stop has the priority.
Need setting E01 load style 9, E12 4 pump
is soft - start control pump.
58
4 pump stop
59
Hand change command
Electric level spring, automation multi-
pump constant water changed
60
Timing water supply reset to 0
Electric level spring the period of time
water supply change to zero