Powtran PI8600 F Series, User Manual, Page: 159 / 166

Appendix I
157
A
p
p
en
d
ix
I
0x08 0x10 0x0001 0x0002 0x04 0x1388,0x0000 0x9851
Register content byte number=2 bytes * register number
Slave response
Slave address Function code Register address Register number CRC checksum
0x08 0x10 0x0001 0x0002 0x1091
0x01
＝
read multiple switch status
Host command read inverter whether arrive lower frequency, or arrive upper frequency
Slave address Function code Starter to end address Switch number CRC checksum
0x08 0x01 0x0006 0x0002 0x5D53
Slave response inverter not arrive lower frequency nor upper frequency
Slave address Function code Read byte number Switch state CRC checksum
0x08 0x01 0x01 0x40 0x53E4
Host command read inverter fault
Slave address Function code Starter to end address Switch number CRC checksum
0x08 0x01 0x0300 0x0020 0x3D0F
Salve response inverter low voltage (E.LU switch address 0x0305)
Slave address Function code Read byte number Switch state CRC checksum
0x08 0x01 0x04 0x20,0x00,0x00,0x00 0x6911
Note
：
return byte
：
4 bytes
；
Return date in order
：
bit7-bit0, bit15-bit8, bit23-bit16, bit31-bit24
0x05
＝
write single switch status
Host command control inverter running
Slave address Function code Output address Output value CRC checksum
0x08 0x05 0x0000 0xFF00 0x8CA3
Slave response
Slave address Function code Output address Output value CRC checksum
0x08 0x05 0x0000 0xFF00 0x8CA3
Host command control inverter stop
Slave address Function code Output address Output value CRC checksum
0x08 0x05 0x0000 0x0000 0xCD53
Slave response
Slave address Function code Output address Output value CRC checksum
0x08 0x05 0x0000 0x0000 0xCD53
Note : set switch to 1,output value is 0xFF00;set switch to 0,output value is 0x0000.