Power Electronics GBC05CI, Manual

Page: 40 / 45

ETHERNET GATEWAY POWER ELECTRONICS
38
ETHERNET GATEWAY CONFIGURATION

Now the users are free to read/write the parameters in both Slave
1 (Node ID: 10) and Slave 2 (Node ID: 21).
Example 2:
The below example describes the procedure in steps for working with
the Static IP address assignation and the Cache Mode as an active
operational mode

Turn off the gateway

Switch on the jumper for configuration mode

Turn on the gateway (now the gateway will enter into
configuration mode).

Connect any MODBUS/RTU application with the 9600 BAUDS,
odd parity, 8 data bits and 1 stop bit.