Power Electronics GBC05CI, Manual

Page: 28 / 45

ETHERNET GATEWAY POWER ELECTRONICS
26
INSTALLATION AND CONNECTION
3.3.4. Variable Speed Drives of SD700 Series
Connection diagram:
Figure 3.11 SD700
– Ethernet Gateway connector
Once the device is connected, set the following parameters as
follows:
Parameter Description Setting
G4.1.1 Main Control Mode 3
The main control of the drive is performed through
communication bus.
G4.1.2
Alternative Control
Mode
3
The alternative control of the drive is performed
through communication bus.
G20.0.1
Communication
Module
0 Modbus; default
G20.1.2
Communication
address
1 – 255 Use different numbers in case of more than 1 inverter
are installed.
G20.1.3
Communication
speed
9600 9600bps.
G20.1.4 Communication parity ODD Odd parity