Power Electronics GBC05CI, Manual

Page: 10 / 45

ETHERNET GATEWAY POWER ELECTRONICS
8
SAFETY INSTRUCTIONS
SAFETY

Before operating the inverter, read this manual thoroughly to gain and
understanding of the unit. If any doubt exists then please contact
POWER ELECTRONICS, (902 40 20 70 / +34 96 136 65 57) or your
nearest agent.

Install the device according to the instructions within this manual.

Ensure that the mounting orientation is correct.

The Ethernet Gateway contains static sensitive printed circuits boards.
Use static safety procedures when handling these boards.
CONNECTION PRECAUTIONS

To ensure correct operation of the inverter it is recommended to use a
SCREENED CABLE for the control wiring.

Always check whether the DC Link LED is OFF before wiring
terminals. The charge capacitors may hold high-voltage even after the
input power is disconnected. Use caution to prevent the possibility of
personal injury.
COMMISSIONING

Follow the steps described in this manual.

Always apply voltage and current signals to each terminal that are
within levels indicated within this manual. Otherwise, damage to the
optional board may result.