Power Electronics GBC05CI, Manual

Page: 18 / 45

ETHERNET GATEWAY POWER ELECTRONICS
16
INSTALLATION AND CONNECTION
CONNECTOR
or
LED
FUNCTION DESCRIPTION
J200 Power supply connector
Brings 24Vdc power supply to the device
PIN SIGNAL
1 GND
2 +24VDC
3 EARTH
J401 RS485 connector
Used for MODBUS-RTU connection
PIN SIGNAL
1 RS485 A
2 RS485 B
3 GND
J302 USB connector Used for configuration and updates of software
J500 RJ45 connector Used for Ethernet connection
LED10 Gateway status
COLOUR: GREEN
BLINKING WITH 200ms INTERVAL: the gateway is
in configuration mode
BLINKING WITH 1s INTERVAL: the gateway is in
operation mode
OFF: the gateway is not processing code
LED100 MODBUS RTU status
GREEN: MODBUS RTU communication success
RED: MODBUS RTU communication failure
OFF: MODBUS RTU communication inactive
LED101 MODBUS TCP status
GREEN: MODBUS TCP communication success
RED: MODBUS TCP communication failure
OFF: MODBUS TCP communication inactive
LED400 Ethernet Activity
RED: Ethernet connection activity, lit when sending
or receiving data.
LED401 Ethernet Link
GREEN: lit when 10Mbps or 100Mbps Ethernet link
detected.