If a data set is selected, the name of the data set is displayed bottom. For
backup sticks the data set name is displayed in the format
BUYYMMDDHHMM (BU for backup and date of backup: Year, Month,
Day, Hour, Minute). As soon as a data set number is selected, the text is
displayed for the data set description.
PStick command (7252)
No operation: This is the basic state. As long as no operation is active
on the stick, this command is displayed.
Reading from stick: Starts reading the data from the stick. This operation
is only possible with READ sticks. The data of the set data set is copied
to the LMS control. First a check is carried out as to whether the data
set may be imported. If the data set is incompatible, it must not be
imported. The display resets toNo operation and displays an error
message. The textReading from stick remains until the operation is
completed or an error occurs. As soon as data transmission begins, the
LMS control goes in a parameterization position. As soon as parameters
are transferred, the LMS control must be unlocked transmission has
ended. Fault 183 parameterization is displayed.
Writing on stick: Starts writing the data from the LMS control to the stick.
This operation is only possible with WRITE sticks. The data is written
into the previously set data set. Before writing of the data begins, it is
checked whether the stick has sufficient capacity for the data and that
the respective customer number is correct. The textWriting on stick
remains until the operation is completed or a fault occurs.
PStick progress (7253)
The read or write progress is displayed as a percentage. If no operation is
active or a fault occurs, 0% is displayed.
The stick status is shown below:
No stick: The LMS control has not detected a stick (the stick may not be
inserted).
Stick ready: Basic condition, stick is detected, no action active, no error
present.
Writing on stick: Data is copied (backup) from the LMS control to the
stick.
Reading from stick: Data is transferred from the stick to the LMS control.
Writing error: An error occurred when copying the data from the LMS
control to the stick. The operation was aborted.
Reading error: An error occurred when copying the data from the stick to
the LMS control.. The operation was aborted. The control LMS is locked.
Status change to read lock.
Incompatible data set: Data set does not match LMS control.
Compatibility conditions are not met. The data set can not be imported.
Wrong stick type: Stick type does not match selected action. E.g.
reading from write stick or writing to read stick is not possible.
Stick format error: Incorrect customer number on the stick or data format
on the stick is unknown and cannot be evaluated by the LMS control.
Check data set: During transmission of a data set from the stick to the
LMS control a problem occurred, but it did not lead to an abort.
Data set disabled: The data set may not be transferred into the LMS
control (read protected).
9.2.22 Configuration of extension modules
Function extension module 1 (7300), Function extension
module 2 (7375) and Function extension module 3 (7450)
When a function is selected, the inputs and outputs are occupied on the
extension module with the functions according to the following table:
Connection ter
minal on module
QX21 QX22 QX23 BX21 BX22 H2/H21 H22
Multifunctional
*
*
*
*
*
*
*
Heating circuit 1
Y1
Y2
Q2
B1
*
*
*
9 Settings
7703046 - 01 - 23072018
Paramount five 30 – 115
127