Porsche 911 GT3 Cup MR Gen. II, Technical Manual

Page: 96 / 120

96 Version V2, 08/2020 Porsche 911 GT3 Cup MR Gen.II
Home
Pit Speed - Overlay:
The pit speed mode can be activated and deactivated using the orange button on the steering wheel.
Activation is only possible at a vehicle speed of more than 10 km/h.
2
2
The pre - setting of the pit speed is done in the engine control unit us-
ing the RaceCon software (Bosch Motorsport).
If the preset maximum speed is observed, the background on the display page is coloured green. In
addition to the centrally located speed display, the current gear selection (left) and the accelerator
pedal position (right) are also displayed.
If the preset speed is exceeded, the background colour of the display page changes to red, signaling to
the driver that they are driving faster than the set speed.
The active pit speed mode is also indicated to the driver via the lower left alarm LED. If the pit speed
mode is deactivated by pressing the orange button again, the ICD returns to the previously displayed
Variable Channel Name Resolution Unit Condition
ALARM Pit Speed ecu_B_pitspeed 1 Km/h Vehicle Speed over 10 Km/h
NOTE
ELECTRICS | Intelligent Color Display (ICD)
Display: Information Overlays (cont.)