Porsche 911 GT3 Cup MR Gen. II, Technical Manual

Page: 50 / 120

50 Version V2, 08/2020 Porsche 911 GT3 Cup MR Gen.II
Home
BODY EXTERIOR | Fender
5.6 Fender
Never tighten the fastening screws for the headlight cover with a tor-
que higher than specified here. Failure to observe can lead to cracks.
8 Nm
8 Nm
►
The weight - optimized fenders are made of carbon fiber composite and are designed to accommo-
date lightweight headlights (XENON) with integrated daytime running lights.
►
The lightweight main headlights and the headlight covers can be replaced separately.
►
The exhaust vents in the fenders (Louvre) ensure continuous ventilation of the wheel house. This
counteracts lifting caused by excess pressure / turbulence in the wheel house, which is noticeable
in the overall downforce of the vehicle.
►
The wheel arch liners on the front axle are made of high durability kevlar - reinforced composite ma-
terial.
NOTE
The headlight covers may only be cleaned with microfibre cloths and
gentle cleaning agents (detergent). Failure to observe can lead to
scratches and clouding of the material.
NOTE
To prevent the headlight covers from fogging up, Manthey - Racing
recommends regular use with appropriate anti - fogging agents.
NOTE
3 Nm
10 Nm