Porsche 911 GT3 Cup MR Gen. II, Technical Manual

Page: 22 / 120

22 Version V2, 08/2020 Porsche 911 GT3 Cup MR Gen.II
Home
SUSPENSION | Service Intervals
Part Service Interval Max. Runtime Service Advice
Wishbone rear axle lower Before every session 90 hours
Check for damage and tight fit. Check
play in the joints.
Wishbone rear axle upper Before every session 90 hours
Check for damage and tight fit. Check
play in the joints.
Trailing arm rear axle lower Before every session 90 hours
Check for damage and tight fit. Check
play in the joints.
Trailing arm rear axle upper Before every session 90 hours
Check for damage and tight fit. Check
play in the joints.
Tie rod rear axle Before every session 90 hours
Check for damage and tight fit. Check
play in the joints.
Side sections rear axle Before every session 90 hours
Check the side parts for damage / cracks
before each event. Crack testing is pos-
sible through Manthey - Racing GmbH.
Spacer drive shaft Before every session -
Check screws for tightness. Screws must
be replaced after each loosening.
Power steering Before every session
See technical manual 911
GT3 Cup Gen.II
Check lines for tight fit and chafing.
Check fluid level. Check the electrical
connections in the trunk liner on the left
for chafe marks and firm seating.
Rims After every event 10.000 km
Visual inspection. Crack inspection pos-
sible by BBS.
4.1 Service Intervals