Porsche 911 GT3 Cup MR Gen. II Technical Manual Download Page 110

Page: 110 / 120

110

Version V2, 08/2020

Porsche 911 GT3 Cup MR Gen.II

Home

Lookup Tables

Optional Radar Setup

►

In the

“Radar”

tab in the Lookup Tables, the optionally available radar system can be activated

The radar system is activated by entering the value “1” into the input 1 field. A default value

"2" (Radar OFF) is entered in the input field.

Activation is only required for a system that has been retrofitted.

NOTE

If the preset values are changed, the setup with the new values must

be transferred to the ICD using the

"Send Setup"

button. All data still

stored on the ICD will be lost when the changed setup is transferred!

NOTE

Further information on the radar system is available on page 97.

NOTE

ELECTRICS | Intelligent Color Display (ICD)

Summary of Contents for 911 GT3 Cup MR Gen. II

























































































































Search results

Summary of Contents for 911 GT3 Cup MR Gen. II

Reviews:

Brands by name

Popular brands

Porsche 911 GT3 Cup MR Gen. II, Technical Manual

Search results

Summary of Contents for 911 GT3 Cup MR Gen. II

Reviews:

Brands by name

Popular brands